Cara Mengeringkan Sarang Burung Walet

          Sarang burung walet apabila di bersihkan haruslah di rendam dengan air terlebih dahulu, atau paling tidak di basahi dengan air supaya antara bulu dan liur burung itu kelihatan terpisah, jadi biar mudah buat kita untuk mencabut bulunya. Efek dari terkena air tersebut adalah pemekaran pada sarang burung, sehingga kelihatan lebih besar dari ukuran semula. Apabila terlalu lama merendam atau terlalu banyak air juga tidak bagus, karena sarang akan jadi lembek dan kadang mengalami patah atau serat-seratnya hancur.
          Ketika sarang sudah bersih tibalah saatnya untuk di keringkan, jika pengeringan ini tidak teratur atau tidak sesuai aturan maka akan mengalami pengeriputan pada bagian ujung sarang, terbentuk seperti zig-zag dan meliuk-liuk, ini akan mengurangi kualitas sarang burung walet, dan otomatis harga jual pun akan menjadi murah.
           Ada beberapa hal yang perlu di ketahui dalam pengeringan ini.
- sesuaikan bentuk sarang burung walet sesuai bentuk semula dengan menggunakan pencetak yang    menyerupai sarang burung walet, sehingga nnanti jika sudah kering tidak akan jauh beda dengan bentuk yang  semula.
- keringkan menggunakan Hair dryer jika sarang tersebut terlalu basah
-  pakailah kipas angin untuk mengeringkan, tunggu selama 1 hari, jika masih belum kering maka tunggulah  sampai benar-benar kering, jangan di angkat dulu sebelum benar-benar kering, karena hal ini akan mengakibatkan sarang tersebut keriput atau tidak sesuai dengan bentuk yang di inginkan
         Demikian cara singkat pengeringan sarang burung walet, semoga bermanfaat

CORE REPAIR HOW WELL AND TRUE

       Core wood is peeling off of the rotary, while the rotary itself is a tool for peeling logs that have been washed thoroughly. When peeled core still wet, to dry it in need of a tool called press dryer. This tool is capable of drying the core as much as 10 cores once the press, for 5 minutes, so fast. Then if everything came out perfect and intact after passing through the press. No, the core will look broken, there were holes and there were charred hehe.
       How do I make it look good and the core intact, only one is in repair. It takes time and a long process, as well as skill and speed. Try to imagine, core exit press 5 minutes so 10 cores. To repair one core is 2 minutes to 1 core and at work by 2 people, how many workers are needed to do this.
       Before the repair core, first prepare the tools
- Knife cutter
- Dantip (a type of adhesive made from paper)
- Wet fabrics, to lubricate dantip
- Gloves
- Mask
- RAFFIA
- The trash
- Sweep stick
- Stick iron
       Before starting work, need to know where to be at the core ripair, there are a lot of issues contained in the core after the exit of the press driyer, which are as follows:
a. Core rupture, usually on the edge
b. Core rude, perhaps because ironing press dryer is not smooth
c. Core broken. So two or three times so
d. Core holes, caused by former knots
e. Knots, looked hard and black upon entering the press
f. Core Corrugated
g. Ticness, or overlap, is caused waste go into press
       Well for this repair process first provide water in a small box or cup, to moisten the cloth, take dantip, then sayatlah core disease as above using a cutter knife, sayatlah resembles the letter V for core rupture, but first tumpangilah above using intact cores , so later when cut, the two cores will be cut. Dispose of broken core earlier, and replaced by an intact core crushing created earlier. Enter and paste using dantip in the corners. Intact and not look good.
       For a hollow core, double sayatlah resembles the letter V like approximation (<>) with the previously superimposed on it in yag core still intact, so that the holes later discarded and replaced intact cores before, almost the same as doing for the core broken. For small holes that we patched it using a small core, this is called "petching".
       That is a glimpse of the ways meripair core. Actually there are three kinds of results of repair, there is a perfect, good and bad. Living in their own split apart by the parts.

WASHING TO SWALLOW'S BIRD NESTS

       Swiftlets or swallows have a very unique nest, the nest is made using their own saliva to completion until the residence can be made by children. Usually these birds live in caves and cliffs are so steep that it is difficult to reach by humans, but now people can easily get them easily in city buildings. Nutritional value of bird's nest is so high that the price is too expensive.
       When we get a bird's nest was definitely in a dirty, lots of feathers and debris attached to the nest, if you choose to drink then let the washing first. Washing it will take quite a long time, a bird's nest can take up to 3 hours, not long enough? But when it's clever, maybe 2 hours is enough.
Provide the following tools:
  1. Tweezers
  2. Grinder
  3. A small bowl
  4. A large bowl
  5. Duster
  6. Tissue
  7. Fluorescent light
  8. Hairdrier
  9. Fan
10. Hairpin
11. Small plastic
12. Sieve
13. Toothbrush
14. Cutter
15. Scissors
16. Tapperwere
17. Plastic printer
       Maybe there are too many ingredients and preparation, this is done in order to really perfect washing results.
       First soak and wash the nest wallet for 3 minutes, scrub with a toothbrush to remove the sand. Then look soft lift and insert into tapperwere. Take the pointy-tipped tweezers resemble needles, if not taper can use a grinder sharpening. Fill a small bowl with water until full. Take a bird's nest in tapperwere then prepared in repeal feathers and other waste, if not I'll look bright fluorescent lights turn on.
       Once completed revoked, wash again with water. The trick is to fill a large bowl with water until full, and then enter a filter on it, then enter the bird's nest in it, brush it clean.
       Repeat it again to remove the feather nest looks really clean free of litter. Use printer bird's nest resembling a swallow nest. Apply white tissue underneath so that if there are filthy would be more visible. When he finished dry nest using hairdrier, and print using the printer's nest. Wrap in plastic and then in the clip with a small hairpin, then entered into a room that had no fan anginya, dried for 1 day 1 night, swallow nest can already be seen with its new and clean.
Good luck